Hall Junior Bandsaw
[Hall Junior]

Hall Junior Bandsaw

SPECIFICATIONS

MOTOR:
1.5 kw standard, 415v, 3ph, 50hz, cabinet enclosed, foot mounted, grease pre-packed ball bearings
Optional: 0.75 kw 240v

ELECTRICAL CONTROLS:
24v switching control 3 switches - 1 push to start,
1 push to stop and
1 emergency latch-in stop button

Drive:
Twin “V” belt drive reduction on 1.5 kw 415v motor with a standard speed of 3000 ft/min
Optional 0.75 kw 240v motor with single “V” belt drive reduction
Optional speeds available on request

SAW BLADE:
13mm wide x 2870 x 3TPI

BLADE TENSIONER:
Fully automatic with blade tension maintained at all times
Entire motor and transmission and lower pulley assembly is slide tension mounted
Automatic blade tension lever mounted below left of table
Broad blade length adjustment not required

BLADE GUIDES AND CLEANERS:
Top and bottom guides are interchangeable
Blade guide is tin plated steel with built in tungsten carbide blade back up
Top and bottom guides are removable for cleaning
Guides and blade cleaners are easily removed with the use of a small ring spanner

WHEELS:
Light weight aluminum wheels - corrosion resistant
Top wheel easily removed for cleaning, dynamically balanced for vibration free operation
Automatic blade tensioning ensures true running of the blade at all times
Top wheel safety lock minimises likelihood of wheel becoming dislodged from its supports in case of blade breakage

CAPACITY:
Cutting clearance 275mm high x 305mm wide

STATIONARY CUTTING TABLE:
One piece 590mm x 810mm heavy duty 2.0mm stainless steel
Turned down edges for rigidity, fully supported for heavy duty use
Easy cleaning one-piece table, heavy-duty nylon table insert promotes longer blade life

GAUGE PLATE:
Large 406 x 152mm gauge plate mounted on full stainless steel assembly
Easy adjustment ensures uniform thickness of cut
Easily removed for breakdown work and cleaning

CONSTRUCTION:
Full stainless steel, smooth grain finish Removable stainless steel top and bottom doors
Stainless steel back cover

SAFETY FEATURES:
Upper and lower pulleys (wheels) are completely enclosed but readily accessible
Blade is guarded above and below the cutting zone, wrap around top blade guard
Fail to safe door interlocks to Australian standard AS4024.1 ensure the machine will not operate with the doors in the open position
Machine ceases operation within approximately 5 seconds of power being turned off Waist high, front of table mounted, start and stop buttons
Plus latch in, twist to release, emergency stop switch (in emergency operator can lean against the machine to cease operation. Button must be manually released to re-start machine
24 volt switching control
Adjustable polyurethane feet for maximum stability
Auto overload motor protection on 415 volt, manual on 240 volt

SANITATION:
Smooth grain finish and radius corners, together with removable doors, promotes ease of cleaning
Plastic removable bone dust tray
Sealed motor compartment eliminates scrap entry

WEIGHT: Nett shipping weight: 160 kg SHIPPING SIZE in cm: 186 h x 92 w x 78 d
DIMENSIONS: Height: 1725mm Floor area: 670mm x 860mm

APPROVAL CERTIFICATES
Meets all current Work Cover and Australian Standards
Australian Communication Authority no. N3940
(“C” tick compliance labelling)

Mechanical Hazard Assessment
(Independent assessment to AS4024.1)

Department of Energy Certificate no. 6673
(Suitable for connection to Australian electricity supply)


Reviews

Pre-owned Machines
Brochures
Promotions
Trade Shows
Product Registration
Distributors
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search